ATEX Category 3 Zone 2 (Gas) and Zone 22 (Dust) Static Dissipative / Grounded Vacuum Cleaner Systems. Designed for the remediation of asbestos, silica, lead and mold.
ATTENTION: during normal operation, in ATEX Zone 22 there are no explosive dusts. Zone 22 isn't an explosive atmosphere.
For the recovery of combustible/conductive dusts you need a vacuum cleaner/dust collector specifically designed for these applications (ATEX Category 1 or 2)
In the presence of combustible/Conductive dusts, as per ANNEX II of ATEX 1999/92/EC, you need an ATEX Category 1, 2 or 3 vacuum cleaner/dust collector.
WARNING -Please take note of the following: Since a "cloud of dust" is not defined by ATEX, the National Fire Protection Agency (NFPA) warns that more than 0.8 mm of combustible dust laying on 5% of the floor of a room is considered a threat of explosion.
Language that CANNOT be used when speaking about ATEX vacuums:
ATEX Type 22 for ATEX Zone 22Atex Vacuum for Zone 22Hazardous Dust ? for Zone 22Vacuum Cleaner ATEX Type H for Zone 22The ATEX Zone 22 vacuum cleaner can recover large quantities in Zone 22Vacuum cleaner 15 ATEX (is this a new directive?)
Language that MUST be used when speaking about ATEX vacuums:
Category 1 ATEX Vacuum CleanerCategory 2 ATEX Vacuum CleanerCategory 3 ATEX Vacuum Cleaner
Why?
To operate in ATEX Zone 22 only ATEX Category 1 & 2 Explosion Proof Vacuum Cleaners are designed to recover combustible & conductive dusts ensuring the health and safety of the end users.
DEFINITION OF A ZONE 22 ACCORDING TO ANNEX I OF ATEX DIRECTIVE 1999/92/CE
A: Zone 22
A place in which an explosive atmosphere in the form of a cloud of combustible dust in air is not likely to occur in normal operation but, if it does occur, will persist for a short period only.
Self-certified ATEX Category 3 vacuum cleaners for use in ATEX Zone 22 hazardous areas have been designed to be used in the presence of combustible dusts but not to recover combustible dusts.
B: Category 3 as defined in the Directive 94/9/EC
Comprises equipment designed to be capable of functioning in conformity with the operating parameters established by the manufacturer and ensuring a normal level of protection.
Equipment in this category is intended for use in areas in which explosive atmospheres caused by gases, vapors, mists, or air/dust mixtures are unlikely to occur or, if they do occur, are likely to do so only infrequently and for a short period only.
Equipment in this category ensures the requisite level of protection during normal operation.
C: Requirements concerning Ingress Protection Rating (IP) as per ATEX harmonized standard IEC 61241-1 Paragraph 6
Dust-tight enclosures IP6X shall be applied for use in:
– zone 20;
– zone 21;
– zone 22 with conductive dust.
Dust-protected enclosures IP5X shall be applied for use in:
– zone 22 with non-conductive dust.
SELECTION CRITERIA FOR VACUUM CLEANERS
Hazardous areas
The following categories of equipment must be used in the Zones indicated:
| - Category 1 vacuum cleaners - Category 1 or 2 vacuum cleaners - Category 1, 2 and/or 3 vacuum cleaners |
in Zone 0 or 20 in Zone 1 or 21 in Zone 2 or 22 |
Applications
An electrically or pneumatically (air) operated vacuum cleaner, certified ATEX Category 2 by a notified independent testing laboratory must be used to recover the following:
|
Dry Recovery
|
Liquid Recovery
|
Category 3 Zone 22: For Janitorial Cleaning Applications, not designed to recover combustible dusts, except by accident, in insignificant quantities
Electric Series
II 3 D Ex tD A22 IP6X T100oC- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- By-Pass universal motor with tD protection
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- For dry recovery only
- Includes disposable filter bags
- Stainless steel body and recovery tank
- Ready to use: filters and SD* tool kit included
- Equipped with SD* 4-wheels. Optional 2 + 2 cart available
*SD - Static Dissipative
Stainless steel body and recovery tank. Contains a true HEPA Filter (H14) located upstream of the motor. 2 more HEPA filters (H14) are included within the powerhead making the powerhead elligible for IP6X. This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts. With a powerful suction this unit is designed for industrial applications. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
| Name | Description | Download |
| ATEX-22E Brochure (Metric) | Technical data for ATEX-22E in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| ATEX-22E Brochure (Imperial) | Technical data for ATEX-22E in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 3 D Ex tD A22 IP6X T100oC- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous duty single phase brushless motor - non sparking
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Heavy duty powder coated body and stainless steel recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart and wire tool basket
*SD - Static Dissipative
Heavy duty powder coated body and stainless steel recovery tank. Equipped with a single phase continuous duty brushless motor which is non-sparking. The unit is also equipped with a true HEPA Filter (H14) which is located upstream of the motor. 2 more HEPA filters (H14) are included within the powerhead making the powerhead elligible for IP6X. This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MFS - Manual Filter Shaker System
The Manual Fitler Shaker system allows the operator to clean the main filter without having to open the vacuum cleaner. This shaker System reduces maintenance down time.
The Manual Filter Shaker System consists of a spring action mechanism operating directly onto the filter cage located inside of the filter chamber. The system is operated by pressing on the ergonomic handle located on the side or top of the filter chamber.
The Manual Filter Shaker dislodges the accumulated caked-on dust from the filter thus improving the filter’s performance.
The filter, along with the filter cage, can be easily removed from the filter chamber and washed with lukewarm water and mild detergents.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| BLSD-25L (DT) MFS HEPA Brochure (Metric) | Technical data for BLSD-25L (DT) MFS HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| BLSD-25L (DT) MFS HEPA Brochure (Imperial) | Technical data for BLSD-25L (DT) MFS HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 3 D Ex tD A22 IP6X T100oC- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous duty single phase brushless motor - non sparking
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Reverse Purge (MRP)
- Reverse Purge Cartridge - 20 ft² (18.600 cm²) - with skirt, SD*
- For dry recovery only
- Heavy duty powder coated body and stainless steel recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Equipped with an SD* 4-wheel cart and wire tool basket
*SD - Static Dissipative
Heavy duty powder coated body and stainless steel recovery tank. Equipped with a single phase continuous duty brushless motor which is non-sparking. The unit is also equipped with a true HEPA Filter (H14) located upstream of the motor. 2 more HEPA filters (H14) are included within the powerhead making the powerhead elligible for IP6X. This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts. Large Reverse Purge Cartridge - 20 ft² (18.600 cm²) - and Skirt included. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MRP - Manual Reverse Purge System
The Manual Reverse Purge (MRP) System allows the operator to not have to open the vacuum cleaner in order to clean the Cartridge. By opening the Reverse Purge Atmospheric Pressure Release Valve the Cartridge is automatically purged of dusts. This Purging System reduces maintenance down time.
The Manual Reverse Purge (MRP) works by :
1 - Closing the slider on the opening to block the suction intake orifice for approximately 5 seconds while the vacuum is running.
2 - Then quickly open Purge Valve. Air is now flowing via the valve through to the filter.
Keep Purge Valve open for 1-2 seconds then close (repeat above steps 2 or 3 times).
Reverse Purge System will cause dust to fall off of the filter.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| BLSD-25L (DT) MRP HEPA Brochure (Metric) | Technical data for BLSD-25L (DT) MRP HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| BLSD-25L (DT) MRP HEPA Brochure (Imperial) | Technical data for BLSD-25L (DT) MRP HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 3 D Ex tD A22 IP6X T100oC- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous duty single phase brushless motor - non sparking
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Powder coated body and stainless steel recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 14.5 gallons (55 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart and wire tool basket
*SD - Static Dissipative
Powder coated body and stainless steel detachable recovery tank. Equipped with a single phase continuous duty brushless motor which is non-sparking. The unit is also equipped with a true HEPA Filter (H14) located upstream of the motor. 2 more HEPA filters (H14) are included within the powerhead making the powerhead elligible for IP6X. This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts. All of our HEPA vacuum cleaner are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MFS - Manual Filter Shaker System
The Manual Fitler Shaker system allows the operator to clean the main filter without having to open the vacuum cleaner. This shaker System reduces maintenance down time.
The Manual Filter Shaker System consists of a spring action mechanism operating directly onto the filter cage located inside of the filter chamber. The system is operated by pressing on the ergonomic handle located on the side or top of the filter chamber.
The Manual Filter Shaker dislodges the accumulated caked-on dust from the filter thus improving the filter’s performance.
The filter, along with the filter cage, can be easily removed from the filter chamber and washed with lukewarm water and mild detergents.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| BLSD-55L (DT) MFS HEPA Brochure (Metric) | Technical data for BLSD-55L (DT) MFS HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| BLSD-55L (DT) MFS HEPA Brochure (Imperial) | Technical data for BLSD-55L (DT) MFS HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 3 D IP55 T125oC- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous Duty - Single or 3-phase motor
- Static dissipating and conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Stainless steel body and recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart and wire tool basket
SD* - Static Dissipative
Stainless steel body and detachable recovery tank. Equipped with a single or 3-phase continuous duty Housing Less Mounted Top (HLMT) motor. The unit is also equipped with a true HEPA Filter (H14) located upstream of the motor. This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MFS - Manual Filter Shaker System
The Manual Fitler Shaker system allows the operator to clean the main filter without having to open the vacuum cleaner. This shaker System reduces maintenance down time.
The Manual Filter Shaker System consists of a spring action mechanism operating directly onto the filter cage located inside of the filter chamber. The system is operated by pressing on the ergonomic handle located on the side or top of the filter chamber.
The Manual Filter Shaker dislodges the accumulated caked-on dust from the filter thus improving the filter’s performance.
The filter, along with the filter cage, can be easily removed from the filter chamber and washed with lukewarm water and mild detergents.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| EUR-25L MFS HEPA Brochure (Metric) | Technical data for EUR-25L MFS HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| EUR-25L MFS HEPA Brochure (Imperial) | Technical data for EUR-25L MFS HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 3 D IP55 T125oC- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous Duty -Single and 3-phase motor
- Static dissipating and conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Reverse Purge (MRP)
- Reverse Purge Cartridge - 20 ft² (18.600 cm²) - with skirt, SD*
- For dry recovery only
- Stainless steel body and recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart and wire tool basket
SD* - STatic Dissipative
Stainless steel body and detachable recovery tank. Equipped iwth a single or 3-phase continuous duty Housing Less Mounted Top (HLMT) motor. The unit is also equipped with a true HEPA Filter (H14) located upstream of the motor. This unit is static dissipating and conductive (Category 3 - Zone 22 (DUST)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts. Large Reverse Purge Cartridge - 20 ft² (18.600 cm²) - and Skirt included. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MRP - Manual Reverse Purge System
The Manual Reverse Purge (MRP) System allows the operator to not have to open the vacuum cleaner in order to clean the Cartridge. By opening the Reverse Purge Atmospheric Pressure Release Valve the Cartridge is automatically purged of dusts. This Purging System reduces maintenance down time.
The Manual Reverse Purge (MRP) works by :
1 - Closing the slider on the opening to block the suction intake orifice for approximately 5 seconds while the vacuum is running.
2 - Then quickly open Purge Valve. Air is now flowing via the valve through to the filter.
Keep Purge Valve open for 1-2 seconds then close (repeat above steps 2 or 3 times).
Reverse Purge System will cause dust to fall off of the filter.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| EUR-25L MRP HEPA Brochure (Metric) | Technical data for EUR-25L MRP HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| EUR-25L MRP HEPA Brochure (Imperial) | Technical data for EUR-25L MRP HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 3 D IP55 T125oC- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for general cleanup for the Food Industry
- Continuous duty single phase motor blower
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS) or Manual Reverse Purge (MRP)
- Reverse Purge Cartridge - 20 ft² (18.600 cm²) - with skirt, SD*
- For dry recovery only
- Heavy duty white powder coated body and stainless steel recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Ready to use: filters and SD* tool kit included
- Unit is compact with small footprint
- Equipped with an SD* 4-wheel cart and wire tool basket
SD* - STatic Dissipative
Tiger-Vac's newest line of vacuum cleaners designed for general cleanup for the Food Industry. This unit has been specifically designed for applications where finely pulverized dust is to be recovered. Made of heavy duty white powder coated construction with a stainless steel detachable recovery tank. This unit is equipped with a true HEPA Filter (H14) located downstream outside of the motor housing. This unit is available with a choice of 2 filtration options - Manual Filter Shaker (MFS) or Manual Reverse Purge (MRP). This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)). This unit cannot be used to recover conductive or combustible dusts. Large Reverse Purge Cartridge - 20 ft² (18.600 cm²) - and Skirt included. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MFS - Manual Filter Shaker System
The Manual Fitler Shaker system allows the operator to clean the main filter without having to open the vacuum cleaner. This shaker System reduces maintenance down time.
The Manual Filter Shaker System consists of a spring action mechanism operating directly onto the filter cage located inside of the filter chamber. The system is operated by pressing on the ergonomic handle located on the side or top of the filter chamber.
The Manual Filter Shaker dislodges the accumulated caked-on dust from the filter thus improving the filter’s performance.
The filter, along with the filter cage, can be easily removed from the filter chamber and washed with lukewarm water and mild detergents.
MRP - Manual Reverse Purge System
The Manual Reverse Purge (MRP) System allows the operator to not have to open the vacuum cleaner in order to clean the Cartridge. By opening the Reverse Purge Atmospheric Pressure Release Valve the Cartridge is automatically purged of dusts. This Purging System reduces maintenance down time.
The Manual Reverse Purge (MRP) works by :
1 - Closing the slider on the opening to block the suction intake orifice for approximately 5 seconds while the vacuum is running.
2 - Then quickly open Purge Valve. Air is now flowing via the valve through to the filter.
Keep Purge Valve open for 1-2 seconds then close (repeat above steps 2 or 3 times).
Reverse Purge System will cause dust to fall off of the filter.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| EUR-25LW SERIES Brochure (Metric) | Technical data for EUR-25LW SERIES in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| EUR-25LW SERIES Brochure (Imperial) | Technical data for EUR-25LW SERIES in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 3 D Ex tD A22 IP6X T100oC- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Static dissipating PTFE bell shapped Main Filter
- Designed for general cleanup
- Continuous duty single phase and 3-phase motors
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Equipped with a Manual Filter Shaker (MFS) system
- For dry recovery only
- Heavy duty powder coated and stainless steel construction
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 10 gallons (38 liters)
- Ready to use: filters and SD* tool kit included
SD* - Static Dissipative
All stainless steel construction (except cart). This unit is available with an optional upstream true HEPA (H14) Filter with housing. This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts. This unit is equipped with a static dissipating bell shapped PTFE filter and Manual Filter Shaker (MFS) system. This unit is also equipped with a maintenance free, beltless side chanel blower with a 25000 hour lifespan. The single phase or 3-phase motor is fully enclosed in a protective cabinet. This unit can be used for general maintenance in hazardous locations. Equipped with a disposable filter bag for the easy and safe disposal of recovered materials. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MFS - Manual Filter Shaker System
The Manual Fitler Shaker system allows the operator to clean the main filter without having to open the vacuum cleaner. This shaker System reduces maintenance down time.
The Manual Filter Shaker System consists of a spring action mechanism operating directly onto the filter cage located inside of the filter chamber. The system is operated by pressing on the ergonomic handle located on the side or top of the filter chamber.
The Manual Filter Shaker dislodges the accumulated caked-on dust from the filter thus improving the filter’s performance.
The filter, along with the filter cage, can be easily removed from the filter chamber and washed with lukewarm water and mild detergents.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| TV2-35L (DT) MFS Brochure (Metric) | Technical data for TV2-35L (DT) MFS in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| TV2-35L (DT) MFS Brochure (Imperial) | Technical data for TV2-35L (DT) MFS in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 3 D Ex tD A22 IP6X T100oC- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Static dissipating Reverse Purge Cartridge
- Designed for general cleanup
- Continuous duty single phase and 3-phase motors
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Equipped with a Manual Reverse Purge (MRP) system
- Reverse Purge Cartridge - 20 ft² (18.600 cm²) - and skirt, SD*
- For dry recovery only
- Heavy duty powder coated and stainless steel construction
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 10 gallons (38 liters)
- Ready to use: filters and SD* tool kit included
SD* - Static Dissipative
All stainless steel construction (except cart). This unit is available with an optional upstream true HEPA (H14) Filter with housing. This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts. This unit is equipped with a static dissipating Reverse Purge Cartridge and Manual Reverse Purge (MRP) system. This unit is also equipped with a maintenance free, beltless side chanel blower with a 25000 hour lifespan. The single phase or 3-phase motor is fully enclosed in a protective cabinet. This unit can be used for general maintenance in hazardous locations. Equipped with a disposable filter bag for the easy and safe disposal of recovered materials. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MRP - Manual Reverse Purge System
The Manual Reverse Purge (MRP) System allows the operator to not have to open the vacuum cleaner in order to clean the Cartridge. By opening the Reverse Purge Atmospheric Pressure Release Valve the Cartridge is automatically purged of dusts. This Purging System reduces maintenance down time.
The Manual Reverse Purge (MRP) works by :
1 - Closing the slider on the opening to block the suction intake orifice for approximately 5 seconds while the vacuum is running.
2 - Then quickly open Purge Valve. Air is now flowing via the valve through to the filter.
Keep Purge Valve open for 1-2 seconds then close (repeat above steps 2 or 3 times).
Reverse Purge System will cause dust to fall off of the filter.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| TV2-35L (DT) MRP Brochure (Metric) | Technical data for TV2-35L (DT) MRP in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| TV2-35L (DT) MRP Brochure (Imperial) | Technical data for TV2-35L (DT) MRP in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 3 D IP55 T125oC- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Static dissipating PTFE bell shapped Main Filter
- Designed for general cleanup
- Continuous duty 3-phase motor
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Equipped with a Manual Filter Shaker (MFS) system
- For dry recovery only
- Heavy duty powder coated and stainless steel construction
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 17 gallons (64 liters). 26 gallons (100 liters) recovery capacity available.
- Ready to use: filters and SD* tool kit included
SD* - Static Dissipative
All stainless steel construction (except cart). This unit is available with an optional upstream true HEPA (H14) Filter with housing. This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts. This unit is equipped with a static dissipating bell shapped PTFE filter and Manual Filter Shaker (MFS) system. This unit is also equipped with a maintenance free, beltless side chanel blower with a 25000 hour lifespan. The 3-phase motor is fully enclosed in a protective cabinet. This unit can be used for general maintenance in hazardous locations. Equipped with a disposable filter bag for the easy and safe disposal of recovered materials. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MFS - Manual Filter Shaker System
The Manual Fitler Shaker system allows the operator to clean the main filter without having to open the vacuum cleaner. This shaker System reduces maintenance down time.
The Manual Filter Shaker System consists of a spring action mechanism operating directly onto the filter cage located inside of the filter chamber. The system is operated by pressing on the ergonomic handle located on the side or top of the filter chamber.
The Manual Filter Shaker dislodges the accumulated caked-on dust from the filter thus improving the filter’s performance.
The filter, along with the filter cage, can be easily removed from the filter chamber and washed with lukewarm water and mild detergents.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| TV4-65L (DT) MFS Brochure (Metric) | Technical data for TV4-65L (DT) MFS in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| TV4-65L (DT) MFS Brochure (Imperial) | Technical data for TV4-65L (DT) MFS in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| CD-4000 EX Brochure | Model Brochure | download |
II 3 D IP55 T125oC- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Static dissipating Reverse Purge Cartridge
- Designed for general cleanup
- Continuous duty 3-phase motor
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Equipped with a Manual Reverse Purge (MRP) system
- Reverse Purge Cartridge - 20 ft² (18.600 cm²) - and skirt, SD*
- For dry recovery only
- Heavy duty powder coated and stainless steel construction
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 17 gallons (64 liters). 26 gallons (100 liters) recovery capacity available.
- Ready to use: filters and SD* tool kit included
SD* - Static Dissipative
All stainless steel construction (except cart). This unit is available with an optional upstream true HEPA (H14) Filter with housing. This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts. This unit is equipped with a static dissipating Reverse Purge Cartrdige and Manual Reverse Purge (MRP) system. This unit is also equipped with a maintenance free, beltless side chanel blower with a 25000 hour lifespan. The 3-phase motor is fully enclosed in a protective cabinet. This unit can be used for general maintenance in hazardous locations. Equipped with a disposable filter bag for the easy and safe disposal of recovered materials. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MRP - Manual Reverse Purge System
The Manual Reverse Purge (MRP) System allows the operator to not have to open the vacuum cleaner in order to clean the Cartridge. By opening the Reverse Purge Atmospheric Pressure Release Valve the Cartridge is automatically purged of dusts. This Purging System reduces maintenance down time.
The Manual Reverse Purge (MRP) works by :
1 - Closing the slider on the opening to block the suction intake orifice for approximately 5 seconds while the vacuum is running.
2 - Then quickly open Purge Valve. Air is now flowing via the valve through to the filter.
Keep Purge Valve open for 1-2 seconds then close (repeat above steps 2 or 3 times).
Reverse Purge System will cause dust to fall off of the filter.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| TV4-65L (DT) MRP Brochure (Metric) | Technical data for TV4-65L (DT) MRP in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| TV4-65L (DT) MRP Brochure (Imperial) | Technical data for TV4-65L (DT) MRP in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| CD-4000 EX Brochure | Model Brochure | download |
- Ideal for the recovery bulky and lightweight scrap material
- Can be connected to process machines
- Continuous duty single and 3-phase motor
- Sight glass to monitor collection bag capacity
- For dry recovery only
- Powder coated steel construction. Stainless Steel AISI 304 available upon request
- Equipped with 4 wheels
| Name | Description | Download |
| SRV-55 Brochure (Metric) | Technical data for SRV-55 in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| SRV-55 Brochure (Imperial) | Technical data for SRV-55 in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
Category 3 Zone 22: For Janitorial Cleaning Applications, not designed to recover combustible dusts, except by accident, in insignificant quantities
Pneumatic (Air-Operated) Series
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static dissipating and conductive (Category 3 - Zone 22 (Dust) & Zone 2 (Gas))
- For dry recovery
- Stainless steel body and recovery tank. Recovery capacity of 10 gallons (38 liters)
- Includes Disposable Filter Bags
- Ready to use: filters and SD* tool kit included
- Equipped with SD* 4-wheels. Optional 2 + 2 cart available
*SD - Static Dissipative
Stainless steel body and recovery tank. Contains a true HEPA Filter (H14) located upstream. This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts or flammable liquids. With a powerful suction this unit is designed for industrial applications. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
| Name | Description | Download |
| ATEX-12A Brochure (Metric) | Technical data for ATEX-12A in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| ATEX-12A Brochure (Imperial) | Technical data for ATEX-12A in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static dissipating and conductive (Category 3 - Zone 22 (Dust))
- For dry recovery
- Ready to use: filters and SD* kit included
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.5 gallons (25 liters)
- Equipped with a SD* wheel cart and canvas tool baskets
*SD - Static Dissipative
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| ATEX-A25L (DT) MRP Brochure (Metric) | Technical data for ATEX-A25L (DT) MRP in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| ATEX-A25L (DT) MRP Brochure (Imperial) | Technical data for ATEX-A25L (DT) MRP in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static dissipating and conductive (Category 3 - Zone 22 (Dust))
- For dry recovery
- Ready to use: filters and SD* kit included
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.5 gallons (25 liters)
- Equipped with a SD* wheel cart and canvas tool baskets
*SD - Static Dissipative
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| ATEX-A25L (DT) MFS Brochure (Metric) | Technical data for ATEX-A25L (DT) MFS in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| ATEX-A25L (DT) MFS Brochure (Imperial) | Technical data for ATEX-A25L (DT) MFS in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static dissipating and conductive (Category 3 - Zone 22 (Dust))
- For dry recovery
- Ready to use: filters and SD* kit included
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 14.5 gallons (55 liters)
- Equipped with a SD* wheel cart and canvas tool baskets
*SD - Static Dissipative
Stainless steel body and recovery tank. Contains a true HEPA Filter (H14) located upstream. This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts or flammable liquids. With a powerful suction this unit is designed for industrial applications. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| ATEX-A55L (DT) MFS HEPA Brochure (Metric) | Technical data for ATEX-A55L (DT) MFS HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| ATEX-A55L (DT) MFS HEPA Brochure (Imperial) | Technical data for ATEX-A55L (DT) MFS HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Heavy duty white powder coated body and stainless steel recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 17 gallons (65 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart and tool basket
SD* - Static Dissipative
Heavy duty white powder coated body with a stainless steel detachable recovery tank. Equipped with a true HEPA Filter (H14). This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MFS - Manual Filter Shaker System
The Manual Fitler Shaker system allows the operator to clean the main filter without having to open the vacuum cleaner. This shaker System reduces maintenance down time.
The Manual Filter Shaker System consists of a spring action mechanism operating directly onto the filter cage located inside of the filter chamber. The system is operated by pressing on the ergonomic handle located on the side or top of the filter chamber.
The Manual Filter Shaker dislodges the accumulated caked-on dust from the filter thus improving the filter’s performance.
The filter, along with the filter cage, can be easily removed from the filter chamber and washed with lukewarm water and mild detergents.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| CS-65L (DT) MFS RE HEPA Brochure (Metric) | Technical data for CS-65L (DT) MFS RE HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| CS-65L (DT) MFS RE HEPA Brochure (Imperial) | Technical data for CS-65L (DT) MFS RE HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Reverse Purge (MRP)
- Reverse Purge Cartridge - 20 ft² (18.600 cm²) - and skirt, SD*
- For dry recovery only
- Heavy duty white powder coated body and stainless steel recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 17 gallons (65 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart and tool basket
Heavy duty white powder coated body with a stainless steel detachable recovery tank. Equipped with a true HEPA Filter (H14). This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts. Large Reverse Purge Cartridge - 20 ft² (18.600 cm²) - and skirt included. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MRP - Manual Reverse Purge System
The Manual Reverse Purge (MRP) System allows the operator to not have to open the vacuum cleaner in order to clean the Cartridge. By opening the Reverse Purge Atmospheric Pressure Release Valve the Cartridge is automatically purged of dusts. This Purging System reduces maintenance down time.
The Manual Reverse Purge (MRP) works by :
1 - Closing the slider on the opening to block the suction intake orifice for approximately 5 seconds while the vacuum is running.
2 - Then quickly open Purge Valve. Air is now flowing via the valve through to the filter.
Keep Purge Valve open for 1-2 seconds then close (repeat above steps 2 or 3 times).
Reverse Purge System will cause dust to fall off of the filter.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| CS-65L (DT) MRP RE HEPA Brochure (Metric) | Technical data for CS-65L (DT) MRP RE HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| CS-65L (DT) MRP RE HEPA Brochure (Imperial) | Technical data for CS-65L (DT) MRP RE HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static dissipating and conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Reverse Purge (MRP)
- Reverse Purge Cartridge - 20 ft² (18.600 cm²) and skirt, SD*
- For dry recovery only
- Heavy duty powder coated body and recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Ready to use: filters and SD* tool kit included
- Equipped with an SD* 4-wheel cart and tool basket
SD* - Static Dissipative
Heavy duty powder coated body and detachable recovery tank. Equipped with a true HEPA Filter (H14). This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts. Large Reverse Purge Cartridge - 20 ft² (18.600 cm²) - and skirt included. All of our HEPA vacuum clenaers are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MRP - Manual Reverse Purge System
The Manual Reverse Purge (MRP) System allows the operator to not have to open the vacuum cleaner in order to clean the Cartridge. By opening the Reverse Purge Atmospheric Pressure Release Valve the Cartridge is automatically purged of dusts. This Purging System reduces maintenance down time.
The Manual Reverse Purge (MRP) works by :
1 - Closing the slider on the opening to block the suction intake orifice for approximately 5 seconds while the vacuum is running.
2 - Then quickly open Purge Valve. Air is now flowing via the valve through to the filter.
Keep Purge Valve open for 1-2 seconds then close (repeat above steps 2 or 3 times).
Reverse Purge System will cause dust to fall off of the filter.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| CS-11 (DT) Brochure (Metric) | Technical data for CS-11 (DT) in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| CS-11 (DT) Brochure (Imperial) | Technical data for CS-11 (DT) in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated. Single or twin venturi for higher power
- For wet and dry recovery. Designed to recover large spills
- Heavy duty powder coated body. Liquid recovery capacity of 55 gallons (209 liters)
- Tilt cart (TC) for easy emptying of recovered materials
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
TC - Tilting Cart
Many of our vacuum cleaners are equipped with a tilting cart for easy maneuverability and for quick disposal of recovered materials. A lever located on the the cart allows the recovery drum to be tilted backwards without having to remove the powerhead. Tilting carts are available in stainless steel or powder coated.
| Name | Description | Download |
| CS-55 (TC) RE HEPA Brochure (Metric) | Technical data for CS-55 (TC) RE HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| CS-55 (TC) RE HEPA Brochure (Imperial) | Technical data for CS-55 (TC) RE HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
Notes:
1. Other models with more power and larger recovery capacities are available upon request.
Electrically or Pneumatically (air) operated models available.
2. ATEX Category 3 vacuum cleaners can be used in Zone 22 in the presence of flour but cannot be used to recover flour (please see the definition for Zone 22 in Annex I of ATEX Directive 1999/92/CE)
Only Category 2 vacuum cleaners designed for use in Zones 21 and 22 can be used to recover flour
In Zone 22, Category 2 and/or 3 vacuum cleaners can be used depending on the application required
Please see selection criteria in Annex II of ATEX Directive 1999/92/CE.
3. HEPA Filters - efficiency of 99.995% on 0.3 microns - Tested IEST RP-CC001.3 - H14 as per MPPS method EN 1822.
ULPA Filters - efficiency of 99.999% on 0.3 microns - Filtration efficiency of 99.9995% on 0.18 microns - Tested IEST RP-CC001.3 - U15 as per MPPS method EN 1822
Please be advised that all Tiger-Vac HEPA/ULPA Filters are DOP tested when assembled, either upstream or downstream, inside of the vacuum cleaners.
All Tiger-Vac HEPA/ULPA Filters are assembled mechanically with 3 bolts and include a specially designed memory gasket in order to prevent any leaks during the life span of the gasket thus insuring the health and safety of the end user.
