Cleanroom Vacuum Cleaner Systems - Pharma
ULPA Filter efficiency of 99.999% on 0.12 micron
- All vacuum cleaner systems featured on this page meet requirements for use in ISO Class 4 (former Class 10) Cleanroom.
Electric Series
- ULPA Filtration U15
- *Cleanroom compatible with ISO Class 4 (former Class 10). Can be used in the pharmaceutical industry
- Static free and ESD safe. EMI/RFI Shielded. Electrical resistivity is less than 10 Ohms
- 4-stage filtration system includes an ULPA Filter U15, Cloth Filter, Dome Filter and Disposable Filter Bag
- Special filter lined with stainless steel is available for the recovery of broken wafers and sharp objects
- Designed for general cleanup in contamination controlled environments
- Single phase thru-flow motor
- For dry recovery only
- All stainless steel construction
- Recovery capacity of 0.5 gallons (2 liters) in Disposable Filter Bag
- Equipped with a shoulder strap and carrying case
- Complete tool kit included
- Brochure (North-America)
- Brochure (Europe)
All stainless steel construction. This unit is equipped with a true ULPA Filter (U15) located upstream of the motor. This unit is EMI/RFI Shielded and will not disrupt computers and other sensitive electronic equipment. This unit is static free and ESD safe and has an electrical resistivity of less than 10 Ohmas. Any static produced while vacuuming is quickly and effectively discharged to the ground. This unit is cleanromm compatible and can be used in the pharmaceutical industry. This unit is designed for general cleanup in contamination controlled environments. This is a dry only vacuum cleaner. All of our ULPA vacuum cleaners are DOP Leak Tested before leaving our facility.
ULPA - Ultra Low Penetration Air Filter
A ULPA filter is a type of air filter. It can remove at least 99.999% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.12 microns or larger.
Tested: IEST RP-CC001.3. U15 by MPPS method as per EN 1822.
10 Ohms - Explosion Proof Requirement
In order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unit must be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms from the grounded air supply hose to any point on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proof and be part of Tiger-Vac's quality control management system ISO 9001:2000.
When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that the source of air supply (compressor) is grounded.
EMI - EMI Suppresion / RFI Shielding
These cleanroom vacuum cleaners are equipped with an electronic filter suppresser which reduces electromagnetic interference (EMI), both radiated and conducted, below class B limits for digital apparatus as established by the FCC and ISO. It also provides shielding against RFI (Radio Frequency Interference). The electronic filter is wired in line with the motor. If the electronic filter should fail, power to the motor will automatically be cut-off. These vacuum cleaners will not disrupt computers, radio and video monitors and other sensitive electronic equipment.
| Name | Description | Link |
| No documents currently available for this model | ||
- ULPA Filtration U15
- *Cleanroom compatible with ISO Class 4 (former Class 10). Can be used in the pharmaceutical industry
- Static free and ESD safe. EMI/RFI Shielded. Electrical resistivity is less than 10 Ohms
- 4-stage filtration system includes an ULPA Filter U15, Cloth Filter, Dome Filter and Disposable Filter Bag
- Special filter lined with stainless steel is available for the recovery of broken wafers and sharp objects
- Designed for general cleanup in contamination controlled environments
- Single phase thru-flow motor
- For dry recovery only
- All stainless steel construction
- Recovery capacity of 0.5 gallon (2 liters) in Disposable Filter Bag
- Equipped with a shoulder strap
- Complete tool kit included
- Brochure (North-America)
- Brochure (Europe)
All stainless steel construction. This unit is equipped with a true ULPA Filter (U15) located upstream of the motor. This unit is EMI/RFI Shielded and will not disrupt computers and other sensitive electronic equipment. This unit is static free and ESD safe and has an electrical resistivity of less than 10 Ohmas. Any static produced while vacuuming is quickly and effectively discharged to the ground. This unit is cleanromm compatible and can be used in the pharmaceutical industry. This unit is designed for general cleanup in contamination controlled environments. This is a dry only vacuum cleaner. All of our ULPA vacuum cleaners are DOP Leak Tested before leaving our facility.
ULPA - Ultra Low Penetration Air Filter
A ULPA filter is a type of air filter. It can remove at least 99.999% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.12 microns or larger.
Tested: IEST RP-CC001.3. U15 by MPPS method as per EN 1822.
10 Ohms - Explosion Proof Requirement
In order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unit must be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms from the grounded air supply hose to any point on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proof and be part of Tiger-Vac's quality control management system ISO 9001:2000.
When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that the source of air supply (compressor) is grounded.
EMI - EMI Suppresion / RFI Shielding
These cleanroom vacuum cleaners are equipped with an electronic filter suppresser which reduces electromagnetic interference (EMI), both radiated and conducted, below class B limits for digital apparatus as established by the FCC and ISO. It also provides shielding against RFI (Radio Frequency Interference). The electronic filter is wired in line with the motor. If the electronic filter should fail, power to the motor will automatically be cut-off. These vacuum cleaners will not disrupt computers, radio and video monitors and other sensitive electronic equipment.
| Name | Description | Link |
| No documents currently available for this model | ||
- ULPA Filtration U15
- *Cleanroom compatible with ISO Class 4 (former Class 10). Can be used in the pharmaceutical industry
- Static free and ESD safe. EMI/RFI Shielded. Electrical resistivity is less than 10 Ohms
- 4-stage filtration system includes an ULPA Filter U15, Cloth Filter, Dome Filter and Disposable Filter Bag
- Special filter lined with stainless steel is available for the recovery of broken wafers and sharp objects
- Designed for general cleanup in contamination controlled environments
- Single phase thru-flow motor
- For dry recovery only
- All stainless steel construction
- Recovery capacity of 1.5 gallon (5.7 liters) in Disposable Filter Bag
- Equipped with a golf cart for easy maneuverability
- Complete tool kit included
- Brochure (North-America)
- Brochure (Europe)
All stainless steel construction. This unit is equipped with a true ULPA Filter (U15) located upstream of the motor. This unit is EMI/RFI Shielded and will not disrupt computers and other sensitive electronic equipment. This unit is static free and ESD safe and has an electrical resistivity of less than 10 Ohmas. Any static produced while vacuuming is quickly and effectively discharged to the ground. This unit is cleanromm compatible and can be used in the pharmaceutical industry. This unit is designed for general cleanup in contamination controlled environments. This is a dry only vacuum cleaner. All of our ULPA vacuum cleaners are DOP Leak Tested before leaving our facility.
ULPA - Ultra Low Penetration Air Filter
A ULPA filter is a type of air filter. It can remove at least 99.999% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.12 microns or larger.
Tested: IEST RP-CC001.3. U15 by MPPS method as per EN 1822.
10 Ohms - Explosion Proof Requirement
In order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unit must be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms from the grounded air supply hose to any point on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proof and be part of Tiger-Vac's quality control management system ISO 9001:2000.
When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that the source of air supply (compressor) is grounded.
EMI - EMI Suppresion / RFI Shielding
These cleanroom vacuum cleaners are equipped with an electronic filter suppresser which reduces electromagnetic interference (EMI), both radiated and conducted, below class B limits for digital apparatus as established by the FCC and ISO. It also provides shielding against RFI (Radio Frequency Interference). The electronic filter is wired in line with the motor. If the electronic filter should fail, power to the motor will automatically be cut-off. These vacuum cleaners will not disrupt computers, radio and video monitors and other sensitive electronic equipment.
| Name | Description | Link |
| No documents currently available for this model | ||
- ULPA Filtration U15
- *Cleanroom compatible with ISO Class 4 (former Class 10). Can be used in the pharmaceutical industry
- Static free and ESD safe. EMI/RFI Shielded. Electrical resistivity is less than 10 Ohms
- 4-stage filtration system includes an ULPA Filter U15, Cloth Filter, Dome Filter and Disposable Filter Bag
- Special filter lined with stainless steel is available for the recovery of broken wafers and sharp objects
- Designed for general cleanup in contamination controlled environments
- Single phase thru-flow motor
- For dry recovery only
- All stainless steel construction
- Recovery capacity of 1.5 gallon (5.7 liters) in Disposable Filter Bag
- Equipped with a backpack harness
- Complete tool kit included
- Brochure (North-America)
- Brochure (Europe)
All stainless steel construction. This unit is equipped with a true ULPA Filter (U15) located upstream of the motor. This unit is EMI/RFI Shielded and will not disrupt computers and other sensitive electronic equipment. This unit is static free and ESD safe and has an electrical resistivity of less than 10 Ohmas. Any static produced while vacuuming is quickly and effectively discharged to the ground. This unit is cleanromm compatible and can be used in the pharmaceutical industry. This unit is designed for general cleanup in contamination controlled environments. This is a dry only vacuum cleaner. All of our ULPA vacuum cleaners are DOP Leak Tested before leaving our facility.
ULPA - Ultra Low Penetration Air Filter
A ULPA filter is a type of air filter. It can remove at least 99.999% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.12 microns or larger.
Tested: IEST RP-CC001.3. U15 by MPPS method as per EN 1822.
10 Ohms - Explosion Proof Requirement
In order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unit must be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms from the grounded air supply hose to any point on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proof and be part of Tiger-Vac's quality control management system ISO 9001:2000.
When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that the source of air supply (compressor) is grounded.
EMI - EMI Suppresion / RFI Shielding
These cleanroom vacuum cleaners are equipped with an electronic filter suppresser which reduces electromagnetic interference (EMI), both radiated and conducted, below class B limits for digital apparatus as established by the FCC and ISO. It also provides shielding against RFI (Radio Frequency Interference). The electronic filter is wired in line with the motor. If the electronic filter should fail, power to the motor will automatically be cut-off. These vacuum cleaners will not disrupt computers, radio and video monitors and other sensitive electronic equipment.
| Name | Description | Link |
| No documents currently available for this model | ||
|
|
|
|
|
|
|
|
|
|
|
|
CR-1000 ULPA
CR-1
EMI-CWR
CR-4D
CWR PHARMA series
Pharmavac 
CD 1500/1501 CR (STD) PHARMA
CD-2600 CR STD (MFS/MRP) PHARMA
CD-1 EX
0081 
II 2 G/D EEx d IIB T4
CD-2 PHARMA Series
EUR PHARMA Series
EXP1-10/15 EX CR PHARMAPneumatic (Air) Series
|
SS-10/15 EX CR PHARMA
Cleanroom Recovery Units
|
|
|
|
INT-5 (CR) For Liquid recovery
|
|
LARU-10 (4W) with MRAC
LARU-10 (4W)
ARU-10 (4W) with MRAC
ARU-10 (4W)Note:
HEPA Filters - efficiency of 99.995% on 0.3 microns - Tested IEST RP-CC001.3 - H14 as per MPPS method EN 1822.
ULPA Filters - efficiency of 99.999% on 0.3 microns - Filtration efficiency of 99.9995% on 0.18 microns - Tested IEST RP-CC001.3 - U15 as per MPPS method EN 1822
Please be advised that all Tiger-Vac HEPA/ULPA Filters are DOP tested when assembled, either upstream or downstream, inside of the vacuum cleaners.
All Tiger-Vac HEPA/ULPA Filters are assembled mechanically with 3 bolts and include a specially designed memory gasket in order to prevent any leaks during the life span of the gasket thus insuring the health and safety of the end user.
