The ATEX marking certifies only, by it's Ingress of Protection (IP), the capacity of the vacuum cleaner to be in the presence of combustible /conductive dusts and/or flammable liquids but does not certify the capacity of the vacuum cleaner to recover them.
Fuel and solvents recovery vacuum cleaner systems:
ATEX Category 2 Explosion proof vacuum cleaner systems for ATEX Zone 1 (Gas) and
ATEX Zone 21 (Dust) (where indicated)
|
|
Electrically Operated Models
0081 
II 2 G/D EEx d IIB T4
IP6X – T135oC
LCIE 03 ATEX 6295
- Aspiratore Antideflagrante/Anti-Innesco legalmente certificato
- Resistenza minore di 10 Ohm
- Filtro a Coalescenza (CFE) per eliminare l'umidità
- Disponibile filtro HEPA H14 a richiesta
- Motore a servizio continuo 3-fase antideflagrante/anti-innesco
- Recupero di benzine, olii e solventi
- Il Fusto a Carboni Attivi agisce come unità di recupero ad Immersione per fumi e vapori
- Capacità di 55 lbs. (25 chili) di carboni attivi per l'assorbimento di fumi e vapori contaminati
- Capacità di recupero di 15 galloni (57 litri) - liquido e 17 galloni (64 litri) - secco
- Equipaggiato con Carrello Idraulico in robusta costruzione verniciata a polvere per un facile svuotamento del materiale recuperato
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.995% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 microns or larger.
Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
CFE - Coalescing Filter Element
The Coalescing filter element is used for the removal of solid particles, water and oil aerosols.
| Name | Description | Link |
| ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas | Certification Document | download |
0081 II 2 G/D Ex d IIA T3 Ex tD A21
IP6X – T 200°C
LCIE 03 ATEX 6297
0081 II 2 G/D Ex d IIA T4 Ex tD A21IP65 – T 120°C
LCIE 03 ATEX 6297
- Legally certified explosion proof/dust ignition proof vacuum cleaner
- Less than 10 Ohms of resistivity
- Available with an optional Activated Carbon Cartridge for the adsorption of toxic/nuisance fumes and vapors
- Designed for aircraft de-fueling and de-puddling
- Single phase explosion proof/dust ignition proof motor
- For wet and dry recovery
- All stainless steel AISI 304 construction (except cart) with red and yellow bands
- Recovery capacity of 12.5 - 45 gallons (47.5 - 171 liters) - wet and 10 - 40 gallons (38 - 152 liters) - dry
- Equipped with a 4-wheel tilting cart for easy emptying of recovered materials
All stainless steel AISI 304 construction (except cart) with red and yellow bands. Less than 10 Ohms of resistivity. These units are available with an optional Activated Carbon Cartridge for the adsorption of toxic/nuisance fumes and vapors. Exhaust connectors and hoses for venting with diverse diameters are also available. These fuel and solvent recovery vacuum cleaners are specifically designed for the recovery of highly flammable, toxic liquids. These vacuum cleaners systems are ideal for the de-fueling and de-puddling of fuel tanks and wings on military or civilian airplanes, as well as for recovering fuel spills. All parts of the vacuum cleaner systems have electrical continuity and bonding techniques to ensure static dissipation. Grounding reels are also available for added security.
NSN: 7910-01-534-2885
NATO STOCK NUMBER: 7910-21-910-8810
NATO STOCK NUMBER: 7910-21-908-3235
NATIONAL STOCK NUMBER: 7910-20-001-8527
10 Ohms - Explosion Proof Requirement
In order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unit must be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms from the grounded air supply hose to any point on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proof and be part of Tiger-Vac's quality control management system ISO 9001:2000.
When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that the source of air supply (compressor) is grounded.
| Name | Description | Link |
| ATEX Vacuum Cleaners electrically operated singlephase T3 | Certification Document | download |
0081 II 2 G/D Ex d IIA T3 Ex tD A21
IP6X – T 200°C
LCIE 03 ATEX 6297
0081 II 2 G/D Ex d IIA T4 Ex tD A21IP65 – T 120°C
LCIE 03 ATEX 6297
- Legally certified explosion proof/dust ignition proof vacuum cleaner
- Less than 10 Ohms of resistivity
- Available with an optional Activated Carbon Cartridge for the adsorption of toxic/nuisance fumes and vapors
- Designed for aircraft de-fueling and de-puddling
- Single phase explosion proof/dust ignition proof motor
- For wet and dry recovery
- All stainless steel AISI 304 construction (except cart) with red and yellow bands
- Recovery capacity of 45 gallons (171 liters) - wet and 40 gallons (152 liters) - dry
- Equipped with a 4-wheel tilting cart for easy emptying of recovered materials. Equipped with a Dead Man Brake to avoid unit movement while on duty
All stainless steel AISI 304 construction (except cart) with red and yellow bands. Less than 10 Ohms of resistivity. This unit is available with an optional Activated Carbon Cartridge for the adsorption of toxic/nuisance fumes and vapors. Exhaust connectors and hoses for venting with diverse diameters are also available. This fuel and solvent recovery vacuum cleaner is specifically designed for the recovery of highly flammable, toxic liquids. This vacuum cleaner system is ideal for the de-fueling and de-puddling of fuel tanks and wings on military or civilian airplanes, as wll as for recovering fuel spills. All parts of the vacuum cleaner system have electrical continuity and bonding techniques to ensure static dissipation. Grounding reels are also available for added security.
NSN: 7910-01-534-2885
NATO STOCK NUMBER: 7910-21-910-8810
NATO STOCK NUMBER: 7910-21-908-3235
NATIONAL STOCK NUMBER: 7910-20-001-8527
10 Ohms - Explosion Proof Requirement
In order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unit must be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms from the grounded air supply hose to any point on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proof and be part of Tiger-Vac's quality control management system ISO 9001:2000.
When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that the source of air supply (compressor) is grounded.
| Name | Description | Link |
| ATEX Vacuum Cleaners electrically operated singlephase T3 | Certification Document | download |
Pneumatic (Air) Models
- Legally certified explosion proof/dust ignition proof vacuum cleaner
- Less than 10 Ohms of resistivity
- Coalescing Filter Element (CFE) for moisture removal
- Optional HEPA Filtration H14 available
- Pneumatically (air) operated
- Fuel, oil and Solvent recovery
- Activated Carbon Drum System acts as an Immersion Fume and Vapor recovery unit
- Capacity of 55 lbs. (25 kilos) of activated carbon pellets for the adsorption of contaminated fumes and vapors
- Recovery capacity of 15 gallons (57 liters) - wet and 17 gallons (64 liters) - dry
- Equipped with a heavy duty powder coated Hydraulic Cart for easy emptying of recovered materials.
Stainless steel Activated Carbon Drum with red and yellow bands and powder coated Hydraulic Cart. Less than 10 Ohms of resistivity. This unit is equipped with a Coalescing Filter Element (CFE) for moisture removal. An optional true HEPA Filter (H14) is also available. Thisunit has been designed to be a fume and vapor recovery unit. This unit has a capacity of 55 lbs. (25 kg) of activated carbon pellets for the adsorption of contaminated fumes and vapors while vacuuming solvents, oils, fuels and other toxins. With its innovative designe the disposable 55 lbs. (25 kg) of activated carbon is easily disposed of and replaced.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.995% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 microns or larger.
Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
CFE - Coalescing Filter Element
The Coalescing filter element is used for the removal of solid particles, water and oil aerosols.
10 Ohms - Explosion Proof Requirement
In order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unit must be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms from the grounded air supply hose to any point on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proof and be part of Tiger-Vac's quality control management system ISO 9001:2000.
When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that the source of air supply (compressor) is grounded.
| Name | Description | Link |
| No documents currently available for this model | ||
II 2 G/D c IIC T6 (85oC)
LCIE 03 ATEX 6310
- Legally certified explosion proof/dust ignition proof vacuum cleaner
- Less than 10 Ohms of resistivity
- Available with an optional Activated Carbon Cartridge for the adsorption of toxic/nuisance fumes and vapors
- Designed for aircraft de-fueling and de-puddling
- Pneumatically (air) operated
- For wet & dry recovery
- All stainless steel AISI 304 construction (except cart) with red and yellow bands
- Recovery capacity of 12.5 - 45 gallons (47.5 - 171 liters) - wet and 10 - 40 gallons (38 - 152 liters) - dry
- Equipped with a 4-wheel tilting cart for easy emptying of recovered materials
All stainless steel AISI 304 construction (except cart) with red and yellow bands. Less than 10 Ohms of resistivity. These units are available with an optional Activated Carbon Cartridge for the adsorption of toxic/nuisance fumes and vapors. Exhaust connectors and hoses for venting with diverse diameters are also available. These fuel and solvent recovery vacuum cleaners are specifically designed for the recovery of highly flammable, toxic liquids. These vacuum cleaner systems are ideal for the de-fueling and de-puddling of fuel tanks and wings on military or civilian airplanes, as well as for recovering fuel spills. All parts of the vacuum cleaner system have electrical continuity and bonding techniques to ensure static dissipation. Grounding reels are also available for added security.
NSN: 7910-01-534-2885
NATO STOCK NUMBER: 7910-21-910-8810
NATO STOCK NUMBER: 7910-21-908-3235
NATIONAL STOCK NUMBER: 7910-20-001-8527
10 Ohms - Explosion Proof Requirement
In order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unit must be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms from the grounded air supply hose to any point on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proof and be part of Tiger-Vac's quality control management system ISO 9001:2000.
When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that the source of air supply (compressor) is grounded.
| Name | Description | Link |
| ATEX Vacuum Cleaners pneumatically (air) operated to be used in Hazardous Areas | Certification Document | download |
II 2 G/D c IIC T6 (85oC)
LCIE 03 ATEX 6310
-
- Legally certified explosion proof/dust ignition proof vacuum cleaner
- Less than 10 Ohms of resistivity
- Available with an optional Activated Carbon Cartridge for the adsorption of toxic/nuisance fumes and vapors
- Designed for aircraft de-fueling and de-puddling
- Pneumatically (air) operated
- For wet and dry recovery
- All stainless steel AISI 304 construction (except cart) with red and yellow bands
- Recovery capacity of 45 gallons (171 liters) - wet and 40 gallons (152 liters) - dry
- Equipped with a 4-wheel tilting cart for easy emptying of recovered materials. Equipped with a Dead Man Brake to avoid unit movement while on duty
All stainless steel AISI 304 construction (except cart) with red and yellow bands. Less than 10 Ohms of resistivity. This unit is available with an optional Activated Carbon Cartridge for the adsorption of toxic/nuisance fumes and vapors. Exhaust connectors and hoses for venting with diverse diameters are also available. This fuel and solvent recovery vacuum cleaner is specifically designed for the recovery of highly flammable, toxic liquids. This vacuum cleaner system is ideal for the de-fueling and de-puddling of fuel tanks and wings on military or civilian airplanes, as wll as for recovering fuel spills. All parts of the vacuum cleaner system have electrical continuity and bonding techniques to ensure static dissipation. Grounding reels are also available for added security.
NSN: 7910-01-534-2885
NATO STOCK NUMBER: 7910-21-910-8810
NATO STOCK NUMBER: 7910-21-908-3235
NATIONAL STOCK NUMBER: 7910-20-001-8527
10 Ohms - Explosion Proof Requirement
In order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unit must be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms from the grounded air supply hose to any point on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proof and be part of Tiger-Vac's quality control management system ISO 9001:2000.
When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that the source of air supply (compressor) is grounded.
| Name | Description | Link |
| ATEX Vacuum Cleaners pneumatically (air) operated to be used in Hazardous Areas | Certification Document | download |
Note:
HEPA Filters - efficiency of 99.995% on 0.3 microns - Tested IEST RP-CC001.3 - H14 as per MPPS method EN 1822.
ULPA Filters - efficiency of 99.999% on 0.3 microns - Filtration efficiency of 99.9995% on 0.18 microns - Tested IEST RP-CC001.3 - U15 as per MPPS method EN 1822
Please be advised that all Tiger-Vac HEPA/ULPA Filters are DOP tested when assembled, either upstream or downstream, inside of the vacuum cleaners.
All Tiger-Vac HEPA/ULPA Filters are assembled mechanically with 3 bolts and include a specially designed memory gasket in order to prevent any leaks during the life span of the gasket thus insuring the health and safety of the end user.
